For detailed information, other images and documents, please select individual articles from the following table.
Adhesive and sealant MS
Universal, durable, elastic, 1-component, MS polymer-based adhesive and sealant
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
- Moisture-curing
- Good levelling properties
- When freshly applied, can be painted over with almost all varnish types commonly used in the trade (please test it yourself beforehand)
- Bonded sheeting can be spot welded
- Solvent-free
- Isocyanate- and silicone-free
- Weatherproof
Not suitable for polyethylene, polypropylene, silicones, PTFE (Teflon®) or soft plastics.
This advice is purely a set of recommendations based on our experience. We advise that you test it for yourself beforehand.
The surfaces must be clean, dry and free from dust and grease. For best results, we recommend using primer. Apply the primer in a thin layer, according to the surface, on the cleaned, grease-free and dry adhesion surfaces. Before applying the sealant, the primer must have evaporated. Please observe the specified drying times.
Most primers contain flammable solvents and are moisture-sensitive. It is therefore advisable to close the container immediately after use. Tip: The material should be primed or varnished over the top within 2 hours, otherwise there is a risk of adhesion problems.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!