-
Würth Hydro
Plant engineering
Fittings
Fittings brass / bronze
-
Angle 90 degree Rautitan LX plasterboard REH
-
Angle 90 degreee brass Rautitan LX/LX+G REH
-
Angle Rautitan LX/LX+G 90 degree with ET REH
-
Angle tran. 90dgr Rautitan RX+ stab. ET bronze REH
-
Angle tran. 90° Rautitan RX+ adap MeplaFix brz REH
-
Bend 45 degree SDR 11 REH
-
Bend 45 degree bronze FF 3120 VIE
-
Bend 45 degree bronze FF 3121 VIE
-
Bend 90 degree SDR 11 REH
-
Bend 90 degree bronze FF 3090 VIE
-
Bend 90 degree bronze MF 3092 VIE
-
Bend 90 degree bronze with flange 3471 VIE
-
Bend Rautitan RX 45 degree bronze REH
-
Bend Rautitan RX 90 degree bronze REH
-
Bend Rautitan RX+ stabil 90 degree bronze REH
-
Bend T-piece Rautitan RX+ reduc. centr. bronze REH
-
Bend transition 90 dgr RT RX+ IT bronze REH
-
Bend transition 90 dgr Rautitan LX IT REH
-
Bend transition 90 dgr Rautitan RX+ IT bronze REH
-
Blanking plug Rautitan LX brass REH
-
Brass male/female reducer ring 0684 PIA
-
Brass nut nickel-plated with water seal EMF
-
Cap bronze F 3301 VIE
-
Compression fitting set Rautitan REH
-
Conex Comp. fitting F w/cyl. M thread 302 IBP
-
Conex Comp. fitting F w/tapered M thread 302TA IBP
-
Conex Compr. fitting F w/F thread 303 IBP
-
Conex Compression fitting F/F 301 IBP
-
Coupling sleeve with O-ring seal CAL
-
Cross connector bronze 3180 VIE
-
DB-wall angle 90°RT RX+ w. thrgho a IT bronze REH
-
Double nipple 3280 VIE
-
Double screw in chrome-plated brass 0039 PIA
-
Extension bronze MF 3525 VIE
-
Extension in chrome-plated brass 0053 PIA
-
Female T-coupling in chrome-plated brass 0054 PIA
-
Female fitting for coupling with 680 and 679 CAL
-
Female/female 90degr elbow chrm-pl. brass 0055 PIA
-
Flat seat union with gasket CAL
-
Interm. coupling RT RX+ stable equal bronze REH
-
Interm. coupling Rautitan LX/LX+G reduc. brass REH
-
Interm. coupling Rautitan RX+ reduced bronze REH
-
Intermediate coupling RT RX+ reduced bronze REH
-
Intermediate coupling Rautitan LX/LX+G brass REH
-
Intermediate coupling Rautitan RX+ bronze REH
-
Intermediate coupling SDR 11 REH
-
Intermediate coupling reduced SDR 11 REH
-
L-joint for PE pipe TOF/G PE PUSH EFF
-
L-joint for PE pipe with ET TOF/G M PUSH EFF
-
L-joint for PE pipe with IT TOF/G F PUSH EFF
-
Long nipple bronze MM 3530 VIE
-
M-M nipple cylindrical EMF
-
Male fitting for coupling with 680 and 679 CAL
-
Male gas reducer/M24x1 chrome-pl. brass 0681 M PIA
-
Male/female 90degr elbow chrome-pl. brass 0055 PIA
-
Male/female extension in chrome-pl. brass 0051 PIA
-
Mi./through-T-piece Rautitan LX+G redu.-centr. REH
-
Nipple bronze 3531 VIE
-
Plug bronze M 3290 VIE
-
Plug bronze M 3291 VIE
-
Rautitan LX self-locking sleeve brass REH
-
Rautitan LX/LX+G tee fitting brass REH
-
Rautitan RX Reduced Bronze Tee Fitting REH
-
Rautitan RX t-connector equal bronze REH
-
Rautitan RX+ T-connector equal bronze REH
-
Reduced bronze Rautitan RX+ Tee connector REH
-
Reduced dbl screw in chrome-plated brass 0039R PIA
-
Reduced m./fem. extension in ch-pl brass 0052 PIA
-
Reducing nipple bronze 3245 VIE
-
Reducing piece bronze FM 3242 VIE
-
Reducing piece bronze MF 3241 VIE
-
Reducing sleeve bronze FF 3240 VIE
-
Screw con. f PE with reduced IT TOF/F RD PUSH EFF
-
Screw con. f. PE w. reduced ET TOF/M RD PUSH S EFF
-
Screw connection MF 3331 VIE
-
Screw connection bronze FF 3330 VIE
-
Screw connection bronze MF 3341 VIE
-
Screw connection elbow O-ring seal sleeve CAL
-
Screw connection elbow female thread O-ring CAL
-
Screw connection elbow male thread O-ring CAL
-
Screw connection elbow three-pieces MF PN 16 CAL
-
Screw connection female thread double O-Ring CAL
-
Screw connection for PE-pipe w. ET TOF/M PUSH EFF
-
Screw connection for PE-pipe w. IT TOF/F PUSH EFF
-
Screw connection male thread double O-Ring CAL
-
Screw connection straight f PE pipe TOF/B PUSH EFF
-
Screw connection straight three-pieces PN 16 CAL
-
Sleeve bronze 3270 VIE
-
Sleeve in chrome-plated brass 0053 PIA
-
Sliding self-locking sleeve SDR 11 REH
-
Solder-union terminal Rautitan RX+ bronze REH
-
Sound/heat insul. box Rautitan WA T-piece 90° REH
-
Sound/heat insulation box Rautitan 90 dgr w ET REH
-
Str. MF fittings w/ch.-pl. brass swivel cap TIR
-
T-joint for PE with junction IT gas TOF/T PUSH EFF
-
T-piece RAUTITAN RX+ reduced bronze REH
-
T-piece Rautitan LX drain with IT brass REH
-
T-piece Rautitan LX oversized central brass REH
-
T-piece Rautitan LX reduced pass. brass REH
-
T-piece Rautitan LX+G drain reduced brass REH
-
T-piece Rautitan LX+G reduced-central brass REH
-
T-piece Rautitan LX/LX+G cent. pass reduc. brs REH
-
T-piece Rautitan LX/LX+G central IT brass REH
-
T-piece Rautitan LX/LX+G central reduced brass REH
-
T-piece Rautitan LX/LX+G reduced loop brass REH
-
T-piece Rautitan RX+ central IT bronze REH
-
T-piece Rautitan RX+ external thread bronze REH
-
T-piece Rautitan RX+ stable IT central bronze REH
-
T-piece bronze 3130 VIE
-
T-piece drain reduced SDR 11 REH
-
T-piece reduced with through-hole SDR 11 REH
-
T-screw connection for PE pipe TOF/T PE PUSH EFF
-
Tap extension bronze 3527 VIE
-
Tap extension bronze chrome plated MF 3526 VIE
-
Tee Rautitan RX+ reduced centre pass bronze REH
-
Tee fitting female thread Rautitan LX brass REH
-
Terminal Smart/Mono/Twin Rautitan LX link REH
-
Three-connector set for three parts incl. seal KLA
-
Transition Rautitan LX with union nut REH
-
Transition Rautitan LX/LX+G w. ET brass REH
-
Transition Rautitan RX+ ET bronze REH
-
Transition Rautitan RX+ stable with ET bronze REH
-
Transition with external thread SDR 11 REH
-
Tubofix fitting dual coupling ITS
-
Tubofix fitting female thread ITS
-
Tubofix fitting male thread ITS
-
Union terminal 90 dgr Rautitan RX+ ET bronze REH
-
Union terminal Rautitan LX/LX+G with IT brass REH
-
Union terminal Rautitan RX+ stable IT bronze REH
-
Union terminal Rautitan RX+ with IT bronze REH
-
Wall T-piece Rautitan RX+ central w. IT bronze REH
-
Wall angle 90° Rautitan LX/LX+G with IT REH
-
Wall angle 90° long Rautitan RX+ IT bronze REH
-
Wall angle 90° short Rautitan RX+ w. IT bronze REH
-
Wall angle 90°Rautitan RX+ plst brd pl bronze REH
-
Wall bracket 90 degree Rautitan LX long IT REH
-
Rautitan LX/LX+G tee fitting brass REH
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).